Keep Device Config in Sync with Projects
Project properties change, and your device auto-reconfigures to match. Config drift impossible.
Trigger
Project Properties Updated
Fires when properties on a Linear project change (status, lead, target date, priority, etc.). Covers projects in both public and private teams — polls with the connected user's token.
Action
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Why this helps
Project changes (scope, lead, priority) don't reach devices. Manual config updates forgotten, devices out of sync with intent.
- Project config changes immediately propagate to devices
- No manual device reconfig after project updates
- Config always matches project intent
- Reduces sync errors and misconfiguration
Setup
Build it in a few focused steps.
- 1Connect Linear and Bolt iot to Notis (one-time setup).
- 2Ask Notis: 'When project properties change, send config updates to my Bolt device and wait for confirmation' or use Automations > New.
- 3Define how property changes map to device config (e.g., 'if priority changes, adjust device polling rate accordingly').
- 4Choose report channel: Slack or email.
- 5Test by changing a project property and confirming the device responds with a config confirmation (e.g., 'CONFIG_UPDATED').
Questions about this workflow
Which project properties should trigger config sync?
Start with priority and status (e.g., 'if project becomes high-priority, increase device sampling rate'). Expand as needed.
How does Notis know what config to send?
You define it in plain language (e.g., 'if priority is Critical, set device mode to high-frequency'). Notis interprets and sends the commands.
What if the device doesn't respond to config command?
Notis waits briefly then alerts you via your chosen channel so you can troubleshoot.
Can I manually override device config?
Yes -- this automation doesn't prevent manual changes. But if project properties change again, the device will re-sync.
When this happens · Trigger
Do this · Action
Supported Triggers and Actions
Notis builds workflows that link Linear to Bolt iot. A trigger fires from one place; an action lands in another.
Linear triggers
Bolt iot actions
Recurring trigger
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Analog Read
Tool to read the analog value from a specified pin on a bolt device. use when you need sensor readings (0–1023) after confirming the device is online.
Webhook trigger
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Comment Received Trigger
Triggered when a comment is received.
Check Bolt device online status
Tool to check whether a specified bolt device is online. use when you need to verify device connectivity before sending commands (e.g., control signals). example: 'check if device bolt1234567 is online.'
Issue Created Trigger
Triggered when a new issue is created.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Issue Updated Trigger
Triggered when an issue is updated. For example labels are changed, issue status is changed, etc.
Bolt IoT Serial Read
Tool to read incoming serial data from a bolt device. use when you've initialized uart with serialbegin and need to retrieve serial data.
Private Team Comment Created
Fires when a new comment is posted on an issue in a private Linear team (polled with the connected user's token).
Bolt IoT Serial Write
Tool to send serial data to a bolt device. use when you need to transmit ascii data over uart after initializing uart with serialbegin.
Private Team Issue Created
Fires when a new issue appears in a private Linear team (polled with the connected user's token).
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Private Team Issue Properties Updated
Fires when properties on an issue change in a private Linear team (polled with the connected user's token).
Connect any two apps with Notis in the middle.
Linear and Bolt iot, or any other combination from 1,000+ integrations.
When this happens · Trigger
Do this · Action
Save your first hour today.
7-day trial of any paid plan, with 20$ of usage included.
No card. Works with personal or business Bolt iot.