Trigger a second Bolt output from Typeform
Route another form-driven decision straight to a Bolt digital pin.
Trigger
New Form Response
Triggers when a respondent completes and submits the form.
Action
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Why this helps
Separate device outputs often require separate manual actions, making simple intake processes harder to execute consistently.
- Keep secondary actions in the same workflow
- Reduce forgotten device toggles
- Make intake routines repeatable
Setup
Build it in a few focused steps.
- 1Connect Typeform and Bolt iot in Notis once.
- 2Create an automation from the Automations area.
- 3Describe which second Bolt device output should be set high or low after each response.
- 4Choose New Form Response as the trigger and set a report destination.
- 5Test one submission and verify the intended output.
Questions about this workflow
How is this different from another digital write?
Use it when the workflow needs a distinct second output or device action with its own purpose.
Can it control an LED or actuator?
Yes, if that component is connected to the specified Bolt digital pin.
What information must I provide?
Provide the Bolt device identifier, digital pin, and desired high or low state.
When this happens · Trigger
Do this · Action
Supported Triggers and Actions
Notis builds workflows that link Typeform to Bolt iot. A trigger fires from one place; an action lands in another.
Typeform triggers
Bolt iot actions
Recurring trigger
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Analog Read
Tool to read the analog value from a specified pin on a bolt device. use when you need sensor readings (0–1023) after confirming the device is online.
Webhook trigger
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
New Form Response
Triggers when a respondent completes and submits the form.
Check Bolt device online status
Tool to check whether a specified bolt device is online. use when you need to verify device connectivity before sending commands (e.g., control signals). example: 'check if device bolt1234567 is online.'
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Bolt IoT Serial Read
Tool to read incoming serial data from a bolt device. use when you've initialized uart with serialbegin and need to retrieve serial data.
Bolt IoT Serial Write
Tool to send serial data to a bolt device. use when you need to transmit ascii data over uart after initializing uart with serialbegin.
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Connect any two apps with Notis in the middle.
Typeform and Bolt iot, or any other combination from 1,000+ integrations.
When this happens · Trigger
Do this · Action
Save your first hour today.
7-day trial of any paid plan, with 20$ of usage included.
No card. Works with personal or business Bolt iot.