Check device responsiveness on a dependable schedule
Confirm that a device can respond to a known command before a control review.
Trigger
Recurring schedule
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Action
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Why this helps
Connectivity checks alone do not prove that the device application is responding correctly.
- Checks application responsiveness
- Finds silent failures
- Creates repeatable evidence
Setup
Build it in a few focused steps.
- 1Connect 21risk and Bolt iot in the Notis portal once.
- 2Create an automation named Scheduled device response check.
- 3Tell Notis to send the approved diagnostic command, read the response, and summarize any failure.
- 4Choose notis_cron and set the recurring schedule.
- 5Choose a report channel and test with one real run.
Questions about this workflow
Can this use any command?
Yes, if the command is supported by the initialized Bolt UART and included in the instruction.
Which action runs it?
Bolt IoT Serial Write and Read, action 1887.
When this happens · Trigger
Do this · Action
Supported Triggers and Actions
Notis builds workflows that link 21risk to Bolt iot. A trigger fires from one place; an action lands in another.
21risk triggers
Bolt iot actions
Recurring trigger
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Analog Read
Tool to read the analog value from a specified pin on a bolt device. use when you need sensor readings (0–1023) after confirming the device is online.
Webhook trigger
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Check Bolt device online status
Tool to check whether a specified bolt device is online. use when you need to verify device connectivity before sending commands (e.g., control signals). example: 'check if device bolt1234567 is online.'
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Bolt IoT Serial Read
Tool to read incoming serial data from a bolt device. use when you've initialized uart with serialbegin and need to retrieve serial data.
Bolt IoT Serial Write
Tool to send serial data to a bolt device. use when you need to transmit ascii data over uart after initializing uart with serialbegin.
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Connect any two apps with Notis in the middle.
21risk and Bolt iot, or any other combination from 1,000+ integrations.
When this happens · Trigger
Do this · Action
Save your first hour today.
7-day trial of any paid plan, with 20$ of usage included.
No card. Works with personal or business Bolt iot.