Answer checklist evidence requests with a device response
Turn a checklist evidence request into one command and one captured reply.
Trigger
Webhook received
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Action
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Why this helps
Evidence collection slows down when checklist owners must coordinate separately with device operators.
- Speeds checklist completion
- Captures direct device proof
- Reduces coordination overhead
Setup
Build it in a few focused steps.
- 1Connect 21risk and Bolt iot in the Notis portal once.
- 2Create an automation named Checklist device proof response.
- 3Tell Notis to send the approved verification command, read the immediate Bolt response, and summarize it for the checklist owner.
- 4Choose notis_webhook and provide the checklist-request webhook.
- 5Choose a report channel and test with one real request.
Questions about this workflow
What does the workflow send?
It sends the exact ASCII command specified in the automation instruction.
What if the response is empty?
The report shows the returned result so the owner can investigate the device.
When this happens · Trigger
Do this · Action
Supported Triggers and Actions
Notis builds workflows that link 21risk to Bolt iot. A trigger fires from one place; an action lands in another.
21risk triggers
Bolt iot actions
Recurring trigger
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Analog Read
Tool to read the analog value from a specified pin on a bolt device. use when you need sensor readings (0–1023) after confirming the device is online.
Webhook trigger
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Check Bolt device online status
Tool to check whether a specified bolt device is online. use when you need to verify device connectivity before sending commands (e.g., control signals). example: 'check if device bolt1234567 is online.'
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Bolt IoT Serial Read
Tool to read incoming serial data from a bolt device. use when you've initialized uart with serialbegin and need to retrieve serial data.
Bolt IoT Serial Write
Tool to send serial data to a bolt device. use when you need to transmit ascii data over uart after initializing uart with serialbegin.
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Connect any two apps with Notis in the middle.
21risk and Bolt iot, or any other combination from 1,000+ integrations.
When this happens · Trigger
Do this · Action
Save your first hour today.
7-day trial of any paid plan, with 20$ of usage included.
No card. Works with personal or business Bolt iot.