Set a Bolt status LED from a webhook
Turn a plain language status update into a visible signal.
Trigger
Webhook received
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Action
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Why this helps
Physical status indicators are often left stale because updating them requires a manual device step.
- Keep a physical signal current
- Use a simple approved request
- Document the resulting pin state
Setup
Build it in a few focused steps.
- 1Connect 1Password and Bolt IoT in Notis once.
- 2Create an automation named Bolt status LED update.
- 3Tell Notis to retrieve credentials from 1Password, verify the device is online, and set the status LED digital pin high or low based on the approved webhook request.
- 4Pick notis_webhook and choose a report channel.
- 5Test with one real status change.
Questions about this workflow
Can high and low represent different states?
Yes. Define what high and low mean for your status LED in the instruction.
Can the request include the status label?
Yes. Include the status label so the run report explains the selected pin state.
When this happens · Trigger
Do this · Action
Supported Triggers and Actions
Notis builds workflows that link 1password to Bolt iot. A trigger fires from one place; an action lands in another.
1password triggers
Bolt iot actions
Recurring trigger
Notis starts this workflow on a schedule, such as daily, weekly, or during business hours.
Analog Read
Tool to read the analog value from a specified pin on a bolt device. use when you need sensor readings (0–1023) after confirming the device is online.
Webhook trigger
Notis starts this workflow when an external tool or custom backend sends an HTTP request.
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Check Bolt device online status
Tool to check whether a specified bolt device is online. use when you need to verify device connectivity before sending commands (e.g., control signals). example: 'check if device bolt1234567 is online.'
Bolt IoT Digital Write
Tool to set a digital pin high or low on a specified bolt device. use when controlling actuators or leds via digital output.
Bolt IoT Serial Read
Tool to read incoming serial data from a bolt device. use when you've initialized uart with serialbegin and need to retrieve serial data.
Bolt IoT Serial Write
Tool to send serial data to a bolt device. use when you need to transmit ascii data over uart after initializing uart with serialbegin.
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a bolt device. use when you need to transmit ascii data over uart and capture its reply immediately.
Connect any two apps with Notis in the middle.
1password and Bolt iot, or any other combination from 1,000+ integrations.
When this happens · Trigger
Do this · Action
Save your first hour today.
7-day trial of any paid plan, with 20$ of usage included.
No card. Works with personal or business Bolt iot.